流量统计配置案例

sys

System View: return to User View with Ctrl+Z.

[H3C]sysname SW1

[SW1]vlan 10

[SW1-vlan10]quit

[SW1]int vlan 10

[SW1-Vlan-interface10]ip address 192.168.1.1 24

[SW1-Vlan-interface10]quit

[SW1]int gi 1/0/1

[SW1-GigabitEthernet1/0/1]port link-type access

[SW1-GigabitEthernet1/0/1]port access vlan 10

[SW1-GigabitEthernet1/0/1]quit

QOS流量统计关键配置点：

[SW1]acl basic 2000

[SW1-acl-ipv4-basic-2000]rule 0 permit source any

[SW1-acl-ipv4-basic-2000]quit

[SW1]traffic classifier 1

[SW1-classifier-1]if-match acl 2000

[SW1-classifier-1]quit

[SW1]traffic behavior 1

[SW1-behavior-1]accounting packet

[SW1-behavior-1]quit

[SW1]qos policy 1

[SW1-qospolicy-1]classifier 1 behavior 1

[SW1-qospolicy-1]quit

[SW1]int gi 1/0/1

[SW1-GigabitEthernet1/0/1]qos apply policy 1 inbound

[SW1-GigabitEthernet1/0/1]qos apply policy 1 outbound

[SW1-GigabitEthernet1/0/1]quit

查看QOS统计情况：

查看QOS显示信息：

如果要清空QOS统计信息，需要使用如下命令：

reset counters interface GigabitEthernet 1/0/1